The Born Body Harness is ideal for confined space or high angle rescue. Truly a comfortable, easy to don full body harness that meets NFPA and ANSI standards and is labeled as such. The harness is ruggedly constructed of 1 23/32" (45 mm) wide 9,000 lbf. (40.03 kN) nylon webbing, teamed up with 5,000 lbf. (22.24 kN) hardware. The Born Body Harness utilizes a single multi-directional screw link front attachment point for simplicity and dependability. This front attachment is for ladder fall protection, work positioning and lowering and raising systems for rescue and rappelling. The unique sliding back yoke attachment point is for fall protection, belay line and retrieval line connections. When stopping a fall, the yoke slides up the shoulder straps, suspending the worker in an upright, heads up posture, ideal for self rescue. Also available with a sewn in back D-ring for those who prefer a back D-ring. Generous padding on the leg loops, chest and back crossing straps along with the handy gear loops make the Born Body Harness a joy to work in. The harness is designed to enable the wearer to don it without putting their feet through the leg loops. The leg loops may be disassembled, wrapped around the legs and then secured. When donned in this manner it eliminates the possibility of chemical contamination to the crotch area from grimy boots as all too frequently happens in conventional step-through leg loops. Optional 5,000 lbf. (22.24 kN) forged steel shoulder D-rings can be used as a lifting point in some confined spaced applications. Note: We recommend the use of a "Y" lifting spreader yoke when lifting / lowering with shoulder "D" rings. NFPA 1983-06 and ANSI labeled. If you need a shock absorbing lanyard to go with your Born Body Harness look in the slings and runners section. Color coded trim enables you to instantly sort harnesses by size. Weight 5 lbs. (2.3 kg). Made in the U.S.A.